UR4 DSR Searching

If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the auto search method to find the correct three-digit code number for your equipment by following these steps:

  1. Turn on the equipment you wish to operate.
  2. Press the DEVICE (TV/Aux/VCR) button to be programmed and the ENTER button simultaneously for 3 seconds. The DEVICE (TV/Aux/VCR) LED will turn on. (The device LED will light up for 20 seconds. The next step must be entered while the LED is on.)
  3. Press the CH+ or CH- button one step at a time or keep it pressed. The remote will emit a series of power ON/OFF commands. Release the CH+ or CH- button as soon as the equipment turns off.
  4. You can verify that you selected the correct code by pressing the POWER button. The equipment should turn on or off.
  5. Press the same DEVICE (TV/Aux/VCR) button to store the code. The DEVICE (TV/Aux/VCR) LED will blink twice to confirm that the code has been stored.