Millennium 4 Searching

If your TV, VCR, or Auxiliary Component does not respond to the DRC after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

For example, to search for a code for your TV:

  1. Turn on your TV.
  2. On the Millennium 4 remote, press and hold SETUP until the LED blinks twice, then release the SETUP button.
  3. Enter 9-9-1. The LED will blink twice.
  4. Aim the remote control at the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.
  5. Press SETUP to lock in the code.

The remote will now control the device you selected in Step 1.

Note: To search for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key (i.e. VCR, CBL, or AUDIO) in Step 2 for the appropriate component you are searching for.