IRC-422 / URC-940 Searching

If your TV does not respond to the DRC after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

  1. Turn on the TV.
  2. Press the TV key for at least three seconds or until the LED blinks.
  3. While pointing the remote at your TV, press the UP arrow key to scan upward to the next code. If the transmitted code is the correct one, your TV will turn off, responding as if its POWER key were pressed.
  4. If your TV does not respond, press the UP arrow key to try the next code. When your TV turns off as a result of the transmitted code, you will know that you have found the correct code.
  5. When you have found the correct code (power to your TV is off), press the ENTER key. This will store the manufacturer's code. The LED will then flash rapidly several times on and stop.

The remote will now control your television.