DRC-800 Code Searching

If your TV, VCR, or Auxiliary Component does not respond to the DRC after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

  1. Press and hold a device mode key (AUDIO, DVD/VCR, or TV) for at least 6 seconds. The LED for each device key lights up, then the key for the device you selected remains on.
  2. Press a function key (such as POWER or MUTE). The device key's LED blinks three times, then turns off.
  3. Press the UP cursor key. The remote will send the IR command for the function you pressed in Step 2.
  4. If the device performed the function you pressed, press OK. The remote will now control the device you selected in Step 1. If the device did not perform the function you pressed, repeat Step 3 until the device performs the function you requested, then press OK.
  5. The remote will now control the device you selected in Step 1.