Florida Cable Inc.

2. On the remote control, press and hold TV until the four mode indicator lights flash twice (approx. 6 seconds).

3 Now enter the 4-digit code shown below:

Many devices have more than one code listed. For these, start with the first code. If that doesn't work, try the second code, and so on.

The TV's indicator should flash twice. If it doesn't, press TV as described above and try again with the next code. For example, if you have a JVC model, press and hold TV until the four mode indicators flash twice, then press 0-0-5-3.

4. After you have entered the correct code, point the remote at your TV and press POWER. If your TV turns on or off, you are finished programming for your TV.

If you have tried all the codes listed for your TV and it still does not turn on or off, click here.

Programming for your VCR:

1. Click on the arrow below to find and highlight your VCR manufacturer from the pull-down menu below:

Choose Manufacturer Choose Manufacturer A-Mark AOC Abex Admiral Adventura Aiko Aiwa Akai Alaron Alleron Ambassador America Action Ampro Anam Anam National Archer Astro Text Audiovox Baysonic Belcor Bell Howell Bradford Brandt Brockwood Broksonic CCE CXC Candle Carnivale Carver Celebrity Cineral Citizen Clairtone Concerto Contec Craig Crosley Crown Curtis Mathes Daewoo Daytron Denon Dumont Dwin Dynatech Electroband Electrohome Emerson Envision Ferguson Fisher Fujitsu Funai Futuretech GE GEC Gibralter Goldstar Gradiente Grundig Grunpy Hallmark Harley Davidson Harmon-Kardon Harvard Havermy Hitachi Ima Infinity Inteq JBL JCB JVC Janeil Jensen KEC KMC KTV Kamp Kawasho Kaypani Kenwood Kloss Konka LG LXI Logik Luxman MEI MGA MTC M-Electronic Magnavox Majestic Marantz Matsushita Megatron Memorex Midland Minutz Mitsubishi Motorola Multitech NAD NEC NTC Nikko Noblex Nordmende Noshi Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland Priceclub Princeton Prism Proscan Proton Pulsar Pulser Quasar RCA Radio Shack Realistic Rhapsody Runco SSS Saba Sampo Samsung Samsux Sansei Sansui Sanyo Scimitsu Scotch Scott Sears Semivox Semp Sharp Shogun Signature Simpson Sony Soundesign Spectricon Squareview Starlite Supre-Macy Supreme Sylvania Symphonic TMK TNCi Tandy Tatung Technics Technol Ace Techwood Teknika Telefunken Tera Thomson Toshiba Tosonic Totevision Trical Ultra Universal Vector Research Victor Video Concepts Vidikron Vidtech Viking Wards Waycon White Westinghouse Yamaha Zenith Zonda

2. On the remote control, press and hold VCR until the four mode indicator lights flash twice (approx. 6 seconds).

3 Now enter the 4-digit code shown below:

Many devices have more than one code listed. For these, start with the first code. If that doesn't work, try the second code, and so on.

The VCR's indicator should flash twice. If it doesn't, press VCR as described above and try again with the next code. For example, if you have a JVC model, press and hold VCR until the four mode indicators flash twice, then press 0-0-6-7.

4. After you have entered the correct code, point the remote at your VCR and press POWER. If your VCR turns on or off, you are finished programming for your VCR.

If you have tried all the codes listed for your VCR and it still does not turn on or off, click here.

Programming for your TV/VCR Combo:

Note: someTV/VCR combinations may require a second TV code to control volume. Check the codes below and follow the instructions in Programming for your TV using the supplied TV code. If there is no TV code listed for your TV/VCR combo's operating code, you will need to use the volume control capabilities of your digital cable box.

1. Click on the arrow below to find and highlight your TV/VCR manufacturer from the pull-down menu below:
2. Choose Manufacturer Brocksonic Citizen Colt Curtis Mathes Daewoo Emerson Funai GE Goldstar Harley Davidson Hitachi Lloyds Magnasonic Magnavox Magnin Memorex MGA Mitsubishi Orion Panasonic Radio Shack RCA Sansui Sanyo Sears Sharp Sony Sylvania Symphonic Thomas White Westinghouse Zenith
3. On the remote control, press and hold VCR until the four mode indicator lights flash twice (approx. 6 seconds).
4. Now enter the 4-digit code shown below:

Many devices have more than one code listed. For these, start with the first code. If that doesn't work, try the second code, and so on.

• The TV/VCR's indicator should flash three times. If it doesn't, press VCR as described above and try again with the next code. For example, if you have a Radio Shack TV/VCR, press and hold VCR until the four mode indicators flash twice, then press 0-0-3-7.
• After you have entered the correct code, point the remote at your TV/VCR and press POWER. If your TV/VCR turns on or off, you are finished programming for your TV/VCR.

If you have tried all the codes listed for your VCR and it still does not turn on or off, click here.